The VF-2 would likely be better with the eye cup, but I don't know that the size is any bigger or a glasses-wearer can see the entire frame.Snell’s window is a phenomenon by which an underwater viewer sees everything above the surface through a cone of light of width of about 96 degrees. What's up with that? Finally, I found it made the camera more awkward to hold than it already is, making it harder to stabilize than without the finder, somewhat the opposite of what you would expect. I also found the finder image very small - no bigger than a typical superzoom image. There was not enough adjustment for me to use the finder without glasses, although removing my glasses off for each shot would be an unacceptable solution, anyway. There was just enough diopter adjustment to get the image in focus while wearing my glasses. Also as a result of the glasses, there was huge light leakage on all sides, and as has been mentioned, the VF-3 has no provision for an eye cup to remedy this. As a result of trying to get even that close, the finder scuffed my glasses (not permanently). I could not get my glasses close enough to see the entire frame in the VF-3, the corners of the image were cut off. It was unusable for me, so I sent it back. I tried the VF-3 on my XZ-1 when it came out last month. If I decided to use with glasses off do they have the +- diopter adjustment for short sighted users? Have any glasses wearers tried these VF? I find it a pain to take my glasses of every time. Maybe wait til demand slacks and the price drops a bit. I think it would be a good accessory for an XZ1. I found it good for framing an EP3 and had no problems using it outside in magnify mode for manual focus. The VF3 is a little smaller and the view thru is is smaller too because of the smaller screen. To the guy in China, make this and sell it for 25 dollars.īy the way, I own a VF2 and have tried the VF3, but only on PENs. Here it is transferred from my Brownie Starflex to the 21st century.Īny patents expired long ago. Since it's your idea, get a license, quick. If someone in China is reading this forum, look for it in the not too distant future. I've tried changing the settings while hooked up to a Pen, but it doesn't seem to remember them. Mine's quite cold in temperature, and too bright. You have limited control of the VF brightness (it's linked to the LCD brightness), but no temperature option. One problem with the VF viewfinders on the XZ-1 is that you can't control the brightness/colour temperature from in-camera menus as you can on the Pens. It's even safe to pick the camera up by the viewfinder (something which, I should add, the manual says you should never ever do). The lack of hotshoe lock really doesn't seem to be a problem on my XZ-1 - the hotshoe is nice and tight, and the VF-2 has never shown the least sign of wanting to fall out. It is big, but from photos I've seen of the VF-3, it's not really significantly smaller. I haven't seen the VF-3 for sale here yet, but can't see it being less than $220, so the price difference is pretty small.ĥ) I'm considering switching from Nikon DSLRs to Olympus m43, so it was worth investing in a good VF. There's no eyecup option for the VF-3.Ĥ) The VF-2 price had come down hugely here in NZ, from about $400 to $280. I have one on its way from B&H at the moment. I considered the VF-3, but decided against it for a few reasons:ġ) VF-2 has better specs - higher resolution, higher magnification.Ģ) VF-2 comes in black to match my XZ-1, while I think VF-3 is silver only.ģ) VF-2 can take an eyecup (the overpriced Olympus EP-9), which should help a lot in blocking unwanted light. Non-electronic, and, again, not perfect, but good enough to nail fast action. Something inexpensive, that normally would fold flat on top of the XZ-1. You know, if I designed this, I'd probably make a flip-up wire frame, a la a 1930's Speed Graphic 'sportsfinder'. I keep the camera in a shirt pocket, so adding anything - a viewfinder, a lens adaper, etc. Surprisingly though, most of the time, the XZ-1's screen is bright enough to see. I use it if I'm outdoors in very bright light where it's hard to see the LCD screen. and 90% of my images are at the wide-angle setting. the angle of view is close enough to my XZ-1's 28mm equiv startup wide-angle lens setting. which was sold to work with the PEN 17mm f/2.8 pancake lens (equivalent to 34mm on a 35mm camera). Here's a third option: get an older VF-1 optical viewfinder (
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |